The design height and description of the square high pole light pole is different from the traffic signal light pole

The design height and description of the square high pole light pole is different from the traffic signal light pole.

1. Square high pole light pole design height: 25 meters, the light pole is an octagonal or twelve-corner tapered rod body, which is divided into three sections, the thickness of which is 6mm from top to bottom. 8mm, 10mm, upper diameter: 280mm, lower diameter: 560mm, designed for maximum wind resistance up to 60m / sec. It is composed of 3 sections and is equipped with high-quality steel disc flange with a diameter of 950mm and a plate thickness of 25mm.

2. The main pole and bracket of the high pole lamp are formed by high-strength high-quality steel plate through a large-scale bending machine with a disposable roller, and the submerged arc is automatically welded. The whole pole and the lamp panel are treated by hot dip galvanizing. The exterior is coated with polyester powder to ensure no corrosion for 30 years.

3. The high pole lamp electric lifting system consists of Shanghai Libo brand electric motor, Jintan brand hoist, hot dip galvanized steel wire rope and rubber cable. The lamp pole is installed in the body and the lifting speed is 3~5 meters per minute.

4. The high pole light guiding and unloading system consists of a guiding wheel and a guiding arm to ensure that the lamp panel does not move laterally during the lifting process, and the lamp panel can be ensured when the lamp panel rises into position. Automatically falls off and locked by the hook.

5. The high pole lighting electrical system consists of 12盏400 w gold halide floodlights, which can automatically control the switching light time and part of the lighting or full illumination through the computer time controller,

6. High pole lightning protection system: 1.5m long lightning rod is installed on the top of the lamp, and 1m long grounding wire is installed in the underground foundation and connected with underground bolts.

7. The high-pole lamp lowering mode is the electric control mode, so that the lamp panel can be safely and reliably lowered to 2.5m from the ground for convenient maintenance. The high-light manual remote control device has a lead-out line, and the operator can remotely control the lowering of the lamp panel at 5 meters, thus ensuring the personal safety of the operator.

8. The descending high pole light can be equipped with a spare cable as needed. When the light panel is lowered to the lowest position, one end of the cable is inserted into the socket of the electrical control system, and the other end is inserted into the light panel. In the junction box, the lamp panel can be directly powered and the fixture can be repaired.

9. All the lamps of the descending high pole lamp are sealed to IP65 standard to prevent dust and rain from immersing and to ensure the service life of the light source and electrical appliances. The luminaire material is generally formed by die-casting aluminum with good corrosion resistance.