What should be noted when installing Yangzhou high pole lamp manufacturers in the installation of the square lift high pole light

Street lights are common in people's daily lives, and only the presence of street lights can make passers-by walking at night safe. rest assured. And the street light also has a high pole light, then Yangzhou high pole light manufacturer should pay more attention to some things in the installation, because The height is not too cold, if there is a problem with the installation, it will cause a lot of unnecessary trouble.

First of all, Yangzhou high pole lamp manufacturers must install a lightning rod when installing high pole lights, which can prevent dangerous accidents in rainy weather and thunder. And be sure to pay attention to some professional installers when installing.

Also install some of the precautions for solar streetlight manufacturers. The second is to install shock absorbers, because large vehicles that come and go on the road are more likely to cause vibration on the ground. If it goes on for a long time, it will cause the street lights to loosen. After that is the setting of the installation program, this must refer to the relevant instructions, so as to avoid installation errors, and can not be normal!

Technical parameters of 15m-40m high pole lamp on the market:

1.High pole light pole: high pole lamp manufacturer is producing The height of the plan is 15-40 meters. The poles are octagonal, twelve-sided and eighteen-sided tapered rods. They are made in 3 sections. The thickness of the plate is from 6 to 8 mm, 8 mm, and the upper diameter is 280 mm. : 560mm, made of high-strength and excellent steel plate by cutting, bending and active welding. It is planned to have a wind resistance of up to 60 m / s. Can be equipped with excellent steel plate flange diameter 950mm, plate thickness 25mm.

2. The main pole and bracket of the high pole lamp are formed by the high-strength steel plate through the large-scale bending machine disposable roller, the submerged arc is actively welded, and the lamp pole and the lamp panel are all treated by hot dip galvanizing. The surface adopts polyester powder coating, which can guarantee the surface corrosion-free for 30 years.

3. High pole lights are available in both landing and non-lifting styles. The landing-type high pole lights are usually used for high pole lights above 18 meters. The electric lifting and lowering operation is convenient. After the lamp panel is raised to the working position, the disc can be actively taken off, the ditch is detached, and the wire rope is unloaded.

There are two ways to raise and lower the high pole lights, which are electric landing and manual landing.

The electric landing system consists of an electric motor, a winch, a hot dip galvanized steel wire rope and a rubber cable. In the light pole body device, the lifting speed is 3 meters to 5 meters per minute.

The manual landing system, the length of the manual remote control lead wire is 10 meters, we can manually control the landing of the light panel at 5 meters, which can ensure our personal safety.

Yangzhou high pole lamp manufacturer

4. The high pole light guiding and unloading system consists of a guiding wheel and a guiding arm, so that the lamp panel can be covered during the lifting process. There will be no lateral movement, and when the light panel is raised back into position, the light panel can be actively detached and locked by the hook.

5. The high pole lighting electrical system can be composed of floodlights or floodlights. The detailed choice can be based on the actual situation of the garden and the needs of the customers; Active control of switch lighting and department lighting or full lighting.

6. Lifting high pole lightning lightning protection system, because the high pole light is installed outdoors, in the thunderstorm meteorological season, it is easy to be struck by lightning, this is a great intimidation, light The high pole lights are destroyed, and the fire or staff casualties are caused, causing huge losses. These are not what we want to see, so the high pole lights should be well protected. A 1.5m long lightning rod is attached to the top of the lamp, and a 1m long grounding wire is installed on the base and connected to the open bolt.

7. Landing high pole lights All lamps are sealed to IP65 international standards to avoid the ingress of dust and rain, and to cover the life of the lamp. The materials of the luminaires are similarly adopted as aluminum alloy plates and stainless steels with good corrosion resistance. Langxu Lighting - Yangzhou High Rod Light Manufacturers