Yangzhou High Rod Light Manufacturer Langxu Lighting, 25m high pole light activity part introduction:

1, the lamp panel is a steel frame structure, which is required to have sufficient structural strength and can be easily dismantled by integral hot dip zinc anticorrosive treatment. Open, easy to install, all connectors are made of stainless steel;

2, lamp row structure connector, foundation bolt nut, etc. are all stainless steel;

3, the lamp panel is Circular frame structure, uniform illumination;

4, the lamp tray must be reliably positioned when it reaches the use position, and the maintenance required for the positioning system should be close to zero, and the upper limit of the lamp plate increases the stroke switch; /p>

5. The work of the luminaire for maintenance should be done on the ground.

lights section :

1. The floodlights are made of aluminum die-cast casing. The material is made of industrial pure aluminum L2: GB3190-82. The lamps are integrated design, with independent light source room and isolation electrical room, surface imported powder. Spray treatment, anti-ultraviolet radiation.

2. The lamp is sealed with a new type of silicone rubber sealing ring. The high temperature resistance is above 250°C, which ensures that the silicone rubber does not age. The protection level is IP65 for a long time. The electrical grade is class I. The utility model has the advantages of convenient operation, safety and reasonable buckle sealing, and the buckle material is stainless steel.

3. The shape of the reflector ensures the requirements of the light distribution curve, no cracks and clear lines. Oxidation treatment: the surface is smooth, uniform, and the reflection coefficient is high, ensuring that the luminous efficiency of the lamp reaches 80% or more, the surface hardness is high, and it is not easy to be scratched.

3. The translucent cover is made of high-strength tempered transparent glass, which requires high temperature resistance above 250 °C, high light transmittance and impact resistance.

4. The lamp is equipped with a live carbon fiber respirator to ensure the circulation of air and prevent dust from entering the reflective port. The lamp holder adopts an elastic structure and has excellent shock resistance. The lamp holder uses a rotating sealed lamp holder, and the electric appliance must be designed and installed inside the lamp.

5. The luminaire meets lightning protection and grounding requirements, pay attention to the basic conditions and working environment of the area, ambient temperature: -15-50 degrees Celsius; ambient wind speed: 36m/s; anti-seismic intensity: 6; Corrosion grade: 20 years, component design and manufacturing (construction) technology in line with national standards.

Electrical system part:

1. The electrical part of the high pole lighting system adopts single-base phase separation (three-phase) control, and each phase has its own separate circuit breaker and contactor. The contactor coil adopts AC 220V, and each base height pole lamp can realize local control and centralized remote control;

2, power supply: 50Hz, AC three-phase five-wire system, 380V /220V 

Yangzhou high pole lamp manufacturer - Langxu Lighting, specializing in the production of square high pole lights, dock high pole lights, airport high pole lights, welcome to buy.